I found the solution elsewhere on this page...below ...it worked:-)
Here's what you need to do. The file that needs to be edited is the PD.INI file. This file has a setting that tells UFT which machine to upload your Web page to. The PD.INI file is located in the same directory (or folder, to use the Windows 95/98 terminology) where you have installed UFT.
1. Use Windows Explorer (Windows 95/98) or File Manager (Windows 3.1x) and go to the directory where you have installed UFT. 2. Look for a file that says wither PD.INI or just PD (which is the PD.INI but you have told Windows not to display the extension). 3. Double-click that file and it will open into Notepad. 4. In the section that says [FTP Server], you will find a line that says: IP=www.palladiumnet.com 5. Change this line so it says: IP=www.uftree.com NOTE: Don't add a second line so you end up with two lines that start IP=. Replace www.palladiumnet.com with www.uftree.com 6. From Notepad's File menu choose Exit and choose Yes when you are asked if you want to save your changes. 7. Now try uploading your Web page. Make sure that "Upload Instant Web Page" dialog box has your correct email address so we can send you an email when your Web page has been successfully processed and added to the uftree.com Web site.
Sincerely, Paul Burchfield, Genealogy.com Technical Support Find Ultimate Family Tree knowledge base articles, hints, tips, message boards and more at: http://www.uftree.com/UFT/Nav/ufttech.htmlhttp://www.uftree.com/UFT/Nav/ufttech.html